Medacure Pro Dynamic – True Low Air Loss Mattress System for Bariatric and Standard Patients, 1,800 LPM Blower, 36″ to 48″, 1,000 lb
$2,326.99
- Rated No. 1 in customer service
- Fast nationwide shipping, delivered to your door
- Manufacturer warranties
- Cash-back rewards on every order
Authorized dealer & provider · Huge selection · Questions? Call 585-505-6665
✔ True Low Air Loss, Over 1,800 LPM
✔ Bariatric and Standard, Up to 1,000 lb
✔ Inflates in About 45 Seconds
✔ Transport Mode Holds Air 24+ Hours
✔ Fowler Function and CPR Quick Deflate
✔ 36″, 42″ or 48″ Wide x 80″
You earn -
Fast nationwide shipping, delivered to your door · 30-day returns on eligible products · Shipping & returns details
Share with Friends
- Description
- PRODUCT SPECIFICATION
- Shipping & Returns
- Product PDF downloads
- Reviews (0)
Description
Medacure Pro Dynamic – True Low Air Loss Mattress for Advanced Wound Care, Standard to Bariatric
The Medacure Pro Dynamic is a true low air loss mattress with a blower that moves over 1,800 liters of air per minute through the entire surface. The patient floats on a cool, dry microclimate built for advanced pressure ulcers, up to Stage IV per Medacure. Comparing surfaces? Start with our hospital bed mattress buying guide and the medical mattress knowledge base.
As a bariatric true low air loss mattress, it is rated for 1,000 lbs, with dual control settings that also suit standard patients, in 36″, 42″ and 48″ widths.
The complete true low air loss mattress system inflates in about 45 seconds and holds air for over 24 hours in transport mode. Questions about sizing or therapy? Call us at 585-505-6665.
✅ Key Features
- ✔️ True Low Air Loss, Over 1,800 LPM
- ✔️ Bariatric and Standard, Up to 1,000 lb
- ✔️ Inflates in About 45 Seconds
- ✔️ Transport Mode Holds Air 24+ Hours
- ✔️ Fowler Function and CPR Quick Deflate
- ✔️ 36″, 42″ or 48″ Wide x 80″
Why True Low Air Loss?
Standard low air loss mattresses vent a small amount of air from a handful of cells. A true low air loss system uses a blower to push large volumes of air through the whole surface. The patient sinks into a soft, evenly supported surface while air carries heat and moisture away from the skin. For patients with advanced pressure ulcers, maceration or heavy perspiration, this is the strongest therapy in Medacure’s range.
Who Is It Best For?
- Patients with advanced pressure ulcers, up to Stage IV per Medacure
- Bariatric patients up to 1,000 lbs, and standard patients
- Patients with moist, macerated or very fragile skin
- Facilities that need one high end surface for many patient sizes
- 36″, 42″ and 48″ wide beds
Compare surfaces with the hospital bed mattress assessment tool.
Who May Need Something Else?
- Patients who also need alternating pressure: the Air Stream combines direct low air loss with alternating cells.
- Bariatric patients who need alternating pressure: the Comfort Zone bariatric 1,000 lb.
- Prevention only: a foam or basic air mattress costs far less. See the pressure relief mattress guide.
Quick Inflate Blower System
The 1,800 LPM blower fills the mattress in about 45 seconds, so there is no long wait at setup or after a transfer. A max inflate function firms the surface quickly for care, and an exhaust hose releases hot air to keep the mattress cool.
Digital Pump Controls
The digital pump has LED indicators, 8 comfort pressure settings chosen by weight or firmness, dual control settings for standard and bariatric patients up to 1,000 lbs, a Fowler function, a panel lock and a one touch CPR emergency deflate. Heavy duty hooks fit any size footboard, and the power cord detaches from the pump for easy replacement.
Built for Moving and Outages
Transport mode keeps air in the mattress for over 24 hours. A carry strap with buckle locks makes the rolled mattress easy to move, safety straps secure it to the bed frame, and an anti skid bottom keeps it from sliding. Cells snap in and out for quick replacement.
Sizes
| Medacure Item # | Width x Length | Weight Capacity |
| PD36 | 36″ x 80″ | Up to 1,000 lbs |
| PD42 | 42″ x 80″ | Up to 1,000 lbs |
| PD48 | 48″ x 80″ | Up to 1,000 lbs |
Medacure’s brochure lists a 10″ mattress height.
Setting Up
Unroll the mattress on the deck, fasten the safety straps and hang the pump on the footboard. Connect the dual valve single head connector and route the exhaust hose away from the patient. Power on, let it inflate (about 45 seconds), choose standard or bariatric control and the comfort setting, then place the patient.
Care
Wipe the fluid resistant cover with a mild disinfectant and let it dry. Inspect cells and the connector regularly and keep the blower’s air intake clear.
What’s Included
Pro Dynamic mattress with 20 replaceable cells and cover, and the digital blower pump.
Specifications
| Brand | Medacure |
| Model | Pro Dynamic True Low Air Loss Bariatric |
| Medacure Item Numbers | PD36 (36″ x 80″), PD42 (42″ x 80″), PD48 (48″ x 80″) |
| Height | 10″ (Medacure brochure) |
| Weight Capacity | 1,000 lbs (Medacure) |
| Therapy | True low air loss through all cells, over 1,800 LPM |
| Cells | 20 snap-in/snap-out cells, cell-on-cell (lower 4″ static) |
| Cell Material | Nylon/TPU |
| Cover | Fluid resistant PU with fiber quilting and zipper; woven base with anti slip coating |
| Pump | Digital blower with LED indicators, 8 pressure settings by weight or firmness, dual standard/bariatric control, Fowler, max inflate, panel lock |
| Inflate / Deflate | Full inflation in about 45 seconds; CPR deflate in about 30 seconds |
| Transport Mode | Retains air over 24 hours |
| Pump Size | 6.8″ x 12.6″ x 12″, 15 lbs |
| Power Cord | 15 ft, 110V/60 Hz medical grade, detachable |
| Treatment | Effective through Stage IV (Medacure) |
| Warranty | 2 years (Medacure) |
Frequently Asked Questions
What is a true low air loss mattress?
It is an air mattress where a powerful blower moves air through every cell, not just a few vented ones. The constant airflow carries away heat and moisture and lets the patient float on a soft, even surface. It is used for patients with advanced pressure ulcers and fragile skin.
How much airflow does the Pro Dynamic produce?
Medacure lists over 1,800 liters per minute throughout the entire mattress, which creates the floating sensation and the cool, dry microclimate that helps wounds heal.
Is it for standard or bariatric patients?
Both. Dual control settings cover standard patients and bariatric patients up to 1,000 lbs, and it comes in 36″, 42″ and 48″ widths.
Does it alternate pressure?
No. The Pro Dynamic is a true low air loss system: the therapy is constant airflow and immersion rather than alternating cells. If you want alternating pressure as well, see the Air Stream or the Comfort Zone series.
How fast does it set up?
The blower system inflates the mattress fully in about 45 seconds, and the one touch CPR function deflates it in about 30 seconds.
What happens during a power outage?
Transport mode retains air for over 24 hours, so the patient stays supported during an outage or a move, and the cell-on-cell design prevents bottoming out.
What is the Fowler function?
It increases the pressure in each cell when the head of the bed is raised, so the patient does not sink through to the frame at the hips while sitting up.
What warranty does it have?
Medacure lists a 2 year warranty.
🔗 Hospital Bed Mattress Guides, Answers & Tools
Want help choosing an advanced air mattress? Start with these pages, or call us at 585-505-6665.
👉 Hospital Bed Mattress Buying Guide
👉 Medical Mattress Knowledge Base
👉 Pressure Relief Mattress Guide
👉 Hospital Bed Mattress Assessment Tool
PRODUCT SPECIFICATION
| Brand: | Medacure |
| Model: | Pro Dynamic True Low Air Loss Bariatric |
| Medacure Item Numbers: | PD36 (36″ x 80″), PD42 (42″ x 80″), PD48 (48″ x 80″) |
| Height: | 10″ (Medacure brochure) |
| Weight Capacity: | 1,000 lbs (Medacure) |
| Therapy: | True low air loss through all cells, over 1,800 LPM |
| Cells: | 20 snap-in/snap-out cells, cell-on-cell (lower 4″ static) |
| Cell Material: | Nylon/TPU |
| Cover: | Fluid resistant PU with fiber quilting and zipper; woven base with anti slip coating |
| Pump: | Digital blower with LED indicators, 8 pressure settings by weight or firmness, dual standard/bariatric control, Fowler, max inflate, panel lock |
| Inflate / Deflate: | Full inflation in about 45 seconds; CPR deflate in about 30 seconds |
| Transport Mode: | Retains air over 24 hours |
| Pump Size: | 6.8″ x 12.6″ x 12″, 15 lbs |
| Power Cord: | 15 ft, 110V/60 Hz medical grade, detachable |
| Treatment: | Effective through Stage IV (Medacure) |
| Warranty: | 2 years (Medacure) |
Shipping & Returns
Shipping & Return Policy
At MedCare Mobility, we understand that purchasing medical and mobility equipment is an important decision. Our goal is to make the ordering, delivery, and return process as clear and straightforward as possible.
Because many of the products we offer are large, specialized, or shipped directly from manufacturer and distributor warehouses, shipping and return requirements may vary somewhat by product and brand. The policy below explains what you can generally expect when ordering from MedCare Mobility.
Shipping & Order Processing
We ship medical and mobility equipment to customers throughout the United States. Orders are processed as quickly as possible, and tracking information is provided once available.
Processing Time
Most in-stock orders are processed within approximately 1–3 business days. Processing may include order verification, warehouse preparation, packaging, and coordination with the manufacturer or distributor.
Some specialty equipment, made-to-order products, oversized items, or products shipping directly from a manufacturer may require additional processing time. Any estimated processing or lead time shown on an individual product page should be considered part of the expected fulfillment timeframe for that item.
Transit & Delivery Time
Once shipped, many standard orders arrive within approximately 3–7 business days. Larger medical equipment, freight shipments, specialty products, and certain manufacturer-direct orders may require additional transit time.
Tracking information will generally be emailed once the shipment has been processed by the carrier. If you have questions regarding the status of your order, please contact us at info@medcaremobility.com.
Alaska, Hawaii & Special Shipping Areas
Orders shipping to Alaska, Hawaii, and certain remote or limited-access areas may be subject to additional shipping charges. If an additional charge is required after your order is reviewed, we will contact you before proceeding whenever additional payment is necessary.
Freight & Oversized Equipment
Hospital beds, patient lifts, large recliners, ramps, and other oversized medical equipment may ship by freight rather than standard parcel service. Unless a specific delivery service is stated on the product page or order, freight delivery does not automatically include inside delivery, assembly, installation, or removal of packaging.
30-Day Return Policy
We want you to feel comfortable ordering from MedCare Mobility. Most eligible products may be returned when a return is requested within 30 days of delivery, subject to the conditions and exclusions outlined below.
Eligible products generally include:
- Electric and power wheelchairs
- Manual and lightweight wheelchairs
- Mobility scooters
- Walkers and rollators
- Patient lifts
- Wheelchair ramps
- Hospital and homecare beds
- Eligible medical mattresses
- Geriatric and medical recliner chairs
- Overbed tables
- Bathroom benches and shower chairs
- Other eligible medical and mobility equipment
Return eligibility can vary by manufacturer and product type. Products specifically identified as non-returnable, custom, made-to-order, or otherwise subject to special return terms are governed by those terms.
Return Authorization
Please contact us before shipping any product back. Returns must first be approved and issued a Return Authorization (RA) and the appropriate return shipping address.
You may request a return by emailing info@medcaremobility.com or contacting our customer service team through the live chat on our website.
Please do not return merchandise to an address shown on the original shipping label unless specifically instructed to do so. Many products ship directly from manufacturer or distributor warehouses, and the correct return location may be different from the original shipping location.
Condition of Returned Merchandise
To qualify for a return and refund, the product must be returned:
- In brand-new and unused condition
- In its complete original manufacturer packaging
- With all manuals, components, hardware, accessories, and included materials
- Without damage, modification, assembly wear, stains, odors, or other signs of use
- In resalable condition upon inspection by the receiving warehouse or manufacturer
We strongly recommend keeping the original box, pallet, protective materials, and packaging until you are certain that you intend to keep the equipment. Large medical equipment can be difficult or impossible to return safely without its original packaging.
Restocking Fees
Approved returns are subject to a mandatory restocking fee, generally ranging from 15% to 20% of the applicable product price. The exact restocking percentage varies depending on the manufacturer, brand, and type of equipment being returned.
These restocking charges are assessed to us by the manufacturer or distributing warehouse when merchandise is returned. MedCare Mobility does not add the fee simply as a return penalty; when the manufacturer requires the charge, we must pass the applicable amount through as part of processing the return.
If you would like to know the applicable restocking percentage for a particular product before ordering, please contact us and we will be happy to help whenever that information is available from the manufacturer.
Return Shipping & Shipping Charges
The customer is responsible for shipping charges associated with the order when making a standard return.
Customers are responsible for arranging for the approved merchandise to be returned to the return address provided with the Return Authorization. In certain cases, we may be able to provide a prepaid return label or coordinate return transportation for your convenience. When provided, the applicable shipping cost may be deducted from the final refund.
Because some medical equipment is oversized or requires freight transportation, prepaid labels or carrier call tags may not be available for every product. Our customer service team will provide the available return instructions when your return is authorized.
Non-Returnable Products
For health, hygiene, safety, customization, and manufacturer-policy reasons, certain products are not eligible for standard returns.
We currently do not accept returns on:
- Parts & accessories
- Wheelchair cushions and support accessories
- Patient lift slings
- Custom or made-to-order products
- Products specifically identified as non-returnable on the product page
If a non-returnable product arrives damaged, defective, or incorrect, please contact us promptly. Non-returnable status does not prevent us from assisting with a legitimate shipping damage, defect, warranty, or fulfillment issue in accordance with the applicable manufacturer and carrier procedures.
Damaged or Incorrect Orders
We take shipping damage seriously and will work with you to help resolve legitimate delivery issues.
If your product arrives damaged, please notify MedCare Mobility within 48 hours of delivery. Whenever possible, retain the shipping carton, pallet, packaging materials, and the product exactly as received and take clear photographs of the packaging and any visible damage.
Reporting damage promptly is important because carriers and manufacturers have limited timeframes for filing freight and shipping claims.
If you receive an incorrect product or believe there is a manufacturer defect, please contact us before returning or disposing of any merchandise or packaging so that we can provide the appropriate instructions.
Refused Deliveries
Please contact us before refusing a delivery unless the shipment has obvious significant freight damage and the carrier is documenting the damage at delivery.
A shipment that is refused for reasons unrelated to verified shipping damage may be treated as a standard return. Applicable restocking and shipping charges may therefore be deducted from the refund.
Return Shipping Deadline
Once a return has been approved and return instructions or a return label have been issued, the merchandise must be shipped within 72 hours unless MedCare Mobility provides different instructions in writing.
This is particularly important when a return is approaching the end of the applicable return period. Returns shipped outside the authorized timeframe may be refused by the manufacturer or warehouse and may no longer qualify for a refund.
Refund Processing
Refunds are processed after the returned merchandise has been received and inspected by the applicable warehouse or manufacturer and the return has been confirmed to meet the return requirements.
The applicable restocking fee, shipping charges associated with the order, and any other authorized return-related charges will be deducted from the amount eligible for refund.
If returned merchandise is used, damaged, incomplete, missing original packaging or components, or otherwise returned in a condition that prevents the manufacturer or warehouse from accepting it as new and resalable merchandise, the return may be refused or the refund may be reduced in accordance with the manufacturer’s assessment.
Custom & Made-to-Order Products
Products identified as custom, configured, made-to-order, special-order, or manufactured specifically for the customer cannot generally be canceled once production or manufacturer processing has begun and are not eligible for standard returns.
For custom products, cancellation may only be possible during the initial processing period and before production or customization begins. Because production schedules vary by manufacturer, we encourage customers to contact us immediately if a change is required.
If a custom product arrives damaged or has a legitimate manufacturing defect, we will work with the manufacturer to pursue the appropriate resolution, replacement components, repair, or other available remedy under the applicable manufacturer policy or warranty.
Questions Before Ordering?
Medical equipment can vary considerably in size, configuration, compatibility, and intended use. If you are unsure whether a product will work for your needs, we strongly encourage you to contact us before placing your order.
Our team is happy to help review product specifications, dimensions, options, compatibility, and available manufacturer information so you can make a more informed purchasing decision and reduce the possibility of needing a return.
For shipping, return, or product questions, contact us at info@medcaremobility.com or speak with us through the live chat on our website.
Product PDF downloads
- - - - - - - - - - -Related products
All explore medical bed mattress →
Medacure Air Stream – Low Air Loss Mattress for Wounds with Direct Air Coverlet, Alternating Pressure and Defined Perimeter, 36″ or 42″, 500 lb
$1,731.99
Medacure Comfort Zone Bariatric Air Mattress – 1,000 lb Bariatric Low Air Loss Mattress with Alternating Pressure, 42″ to 54″ Wide
$1,143.99
Joerns DermaFloat LAL Mattress System – Low Air Loss Mattress with Pulsation, 500 lb, 10″ Deep, 36″ or 42″ Wide
$3,956.00
Joerns Arise 1000 Bariatric Low Air Loss Mattress System – 1,000 lb Capacity, Pulsation, Autofirm, for Bari10A Beds
$447.00
Joerns DermaFloat APL Mattress System – Alternating Pressure Low Air Loss Mattress, 350 lb, 36″ or 42″ Wide
$4,067.00
Medacure Comfort Zone with Built-In Air Perimeter – Low Air Loss Mattress with Bolsters for Fall Prevention, 36″, 42″ or 48″ Wide
$707.99
Optional Add OnsOptional accessories for the Medacure Pro Dynamic — add any to your order
See all accessories →
Medacure Mattress Extender – 4″ Foam Hospital Bed Mattress Extender and Gap Filler, 36″, 42″ or 48″ Wide
$60.99
Medacure Universal Mattress Cover with Defined Perimeter – Fall Prevention Mattress Cover with Foam Bolsters, 36″ to 48″ Wide
$119.99
Proactive Protekt Rail Guard – Bed Rail Gap Filler for Side Rail Gaps, Half 36″ or Full 70″ Length
$42.00
New arrivals
Diestco Nosing Ramp R2100 – Small Rubber Threshold Ramp, 36″ Wide, 3/4″ to 1 3/4″ Rise
$79.00
Joerns DolphinCare Integrated Bed System – Fluid Immersion Bed on UltraCare XT Frame, 35″ or 42″ Wide
$33,211.00
Reviews
There are no reviews yet